USN 300
| # | PARAMETERS | ASTM D | UNIT | SPECS. |
| 1 | Appearance | Visual | - | C&B |
| 2 | Density @ 15°C | 7042 | Kg/m3 | 857 - 870 |
| 3 | ASTM Color, Max. | 1500 | - | 2.0 |
| 4 | Kinematic Viscosity @ 40°C | 445 | cSt | 55 - 61 |
| 5 | Kinematic Viscosity @ 100°C | 445 | cSt | 7.7 – 9.3 |
| 6 | Viscosity Index, Min. | 2270 | - | 104 |
| 7 | Flash Point, COC, Min. | 92 | °C | 220 |
| 8 | Flash Point, PMCC, Min. | 93 | °C | 210 |
| 9 | Pour Point, Max. | 97 | °C | -9 |
| 10 | Conradson Carbon Residue, Max. | 189 | Wt.% | 0.05 |
| 11 | Neutralization No., Max. | 974 | mg KOH/g | 0.05 |
| 12 | Copper Corrosion, Max. | 130 | 100 °C/3Hrs | 1a |
| 13 | Ash Content, Max. | 482 | Wt.% | 0.01 |
| 14 | Sulphur Content, Max. | 4294 | Wt.% | 0.3 |
| 15 | Saturates, Min. | 2007 | Wt.% | 75 |
Applications:
1. This Product useful in the preparation of Lubricating Oil such as Engine Oils for Petrol/Diesel engines, Hydraulic Oils & General Purpose Oils
2. It is also useful in the production of Automotive/Industrial Gear Oils, Additives, Compressor oils & Automotive/Industrial Grease
3. Moreover, it is used in the production of rubber and plastics as a process oil and as a cutting fluid in the metalworking sector